|
|
Post by troyboy30 on Feb 5, 2012 12:57:55 GMT -1
Fixing to pull the trigger on an 1198. Considering letting bay marine do the install but they keep raising the labor rate. Any suggestions on a better place for install?
|
|
IceAAA
Executive Member
Posts: 576
|
Post by IceAAA on Feb 5, 2012 13:53:28 GMT -1
Keep in mind Bay may be quicker and more efficient. It usually washes out once another place spends more hours at a cheaper rate. I'd rather pay a little more for someone I trust, since you'll have less hassle in the long run. Just my two cents...
|
|
|
|
Post by Mike Bucca on Feb 5, 2012 18:08:20 GMT -1
Fixing to pull the trigger on an 1198. Considering letting bay marine do the install but they keep raising the labor rate. Any suggestions on a better place for install? Troy Rigging a sonar is as simple as running wires and mounting the mount and ducer? Nothing to it? |
|
|
|
Post by troyboy30 on Feb 5, 2012 23:11:33 GMT -1
Yea you don't want me working on anything but a computer lol
|
|
|
|
Post by soretoe on Feb 18, 2012 12:45:16 GMT -1
I can do it for you but you will need to bring
it to me in Douglasville. I work cheap too.
|
|
|
|
Post by Trap Assassin on Feb 18, 2012 13:01:59 GMT -1
I second what Mike says easy as can be... Also Lou did a great job on my 797 however after watching him do that one I have since moved that on to the front and installed my 998 at the console...I would get together with Lou and have him do it and save your money......
Sean
|
|
|
|
Post by Mike Bucca on Feb 19, 2012 6:47:31 GMT -1
Lou's my electrician. LOL. I can rig electronics no problem but thats where the line stops. Looking back I wish I paid more attention in high school in electronics. If it has more then 2 wires and they aren't red or black I'm screwed LOL.
|
|
|
|
Post by troyboy30 on Feb 19, 2012 10:51:19 GMT -1
See it ain't just me lol
|
|
