ProMo
Executive Member
Posts: 1,971
|
Post by ProMo on Jun 25, 2010 13:49:40 GMT -1
For those of you who have on board chargers-what amp fuse do most of them take? I have a ProMariner 2 Bank and i need to replace the fuses in both the trolling Motor Side and the cranking side but you can't read the Amps on the fuse, i would think they are no more then 10 AMP-anyone knowThanx-Mo ;D ;D ;D ;D
|
|
|
Post by dannyp on Jun 25, 2010 17:09:17 GMT -1
MORE THAN LIKELY 10 BUT I HAVE SEEN SOME 15
|
|
|
Post by RangerCliff on Jun 25, 2010 18:33:31 GMT -1
Depends on the charger output. Some of the Promariner chargers have a 20amp output, in which case 10amps wouldn't cut it. If you look up your charger model on the Promariner site it should tell you what size the fuses are.
|
|
|
Post by kb929cdx on Jun 26, 2010 1:20:48 GMT -1
I have a dual pro,and it has 20 amp fuse's!
|
|
crizzel
Executive Member
Posts: 1,213
|
Post by crizzel on Jun 26, 2010 23:15:16 GMT -1
Thats what i was gonna say.. 20amp seems to be right.. it also depends how many amps your charger puts out
|
|
ProMo
Executive Member
Posts: 1,971
|
Post by ProMo on Jun 28, 2010 11:12:55 GMT -1
It did in deed end up being 20 amp, found out by putting 10 in both and it popped em both , 20 amp held and she charged right up. Thanks -Mo ;D
|
|