|
|
Post by Fletcher on Sept 11, 2010 15:05:00 GMT -1
OK I don't really know how to describe it. While on the water going about half throttle every things fine, but as soon as I go over half it starts to feel like something is slipping and the motor starts to rev up really high.
Anyone know what it might be? would love some help here. I can't afford to take her to a mechanic.
86 Evenrude 35.
|
|
|
|
Post by oldfishinfool on Sept 11, 2010 15:15:01 GMT -1
sound like your prop hub is slipping. oldfishinfool
|
|
johnk
Junior Member
Posts: 83
|
Post by johnk on Sept 11, 2010 15:46:26 GMT -1
Mine did that one time and the last 3 times it has been great. Wonder what the odds are of it being the prop because that is sure what it felt like. High revs and no speed but just one day on the way back to the ramp.
|
|
|
|
Post by Fletcher on Sept 11, 2010 23:14:05 GMT -1
I'll have to check that out. I have already done some checking on line and that seems to but what I'm coming across a lot. Now I just need to find one I can afford. Any one got one ling around? LOL
Thank oldfishinfool
|
|
|
|
Post by himobley on Feb 8, 2011 15:10:49 GMT -1
Alabama Prop in Peidmont Ala.
|
|
|
|
Post by pbmang on Feb 8, 2011 16:14:30 GMT -1
You might not need a whole new prop, just a new hub. I have a small press at the house and would be happy to let you have at it one weekend if you are able to press a new hub in (assuming that is the problem).
|
|
|
|
Post by Fletcher on Feb 8, 2011 16:21:16 GMT -1
I went to have a hub pressed in and they bent the hub so I had to go and buy a hole new prop. Thanks for the offer and help thanks guys. Oh and got a great deal on the prop also.
|
|
|
|
Post by Bob Smith (Porko) on Feb 8, 2011 21:57:33 GMT -1
I went to have a hub pressed in and they bent the hub so I had to go and buy a hole new prop. Thanks for the offer and help thanks guys. Oh and got a great deal on the prop also. have you tried it out to make sure that was the problem? |
|
