|
Post by jascott on Mar 24, 2011 23:15:07 GMT -1
Hey Guys, Just put in a new livewell pump. I am wondering how far up the wiring is the fuse normally placed? The wiring of the old pump runs up to the point I can't see it anymore and still did not see a fuse in the line. The old pump was cracked and I replaced it and spliced my new wiring into the current wiring. It still does not work so I am assuming the fuse is blown in the wiring towards the switch. Any suggestions? Thanks, Archie
|
|
dcan
Full Member
Posts: 151
|
Post by dcan on Mar 25, 2011 0:06:50 GMT -1
Archie, It depends on the boat make. Most have a circuit breaker at the switch in the console. If it is a breaker it will have a reset button you can press.
|
|
IceAAA
Executive Member
Posts: 576
|
Post by IceAAA on Mar 25, 2011 0:23:29 GMT -1
Some also have a fuse block with fuses for most or all of the electronics on the boat.
|
|