|
|
Post by larryc on Apr 7, 2018 18:21:33 GMT -1
My Minn Kota 65 Edge stopped working after a few hours fishing. It would not work in any speed or setting. I “tapped” the head and it started working. Intermittently continued to stop working and would start again once the head was tapped. I cannot locate any loose wires in the head.
Any ideas?
|
|
|
|
Post by jbruce482 on Apr 7, 2018 22:08:33 GMT -1
take your connecton loose and clean them up my mototerguide did the same thing clean batery and trolling head
|
|
|
|
Post by larryc on Apr 8, 2018 16:42:52 GMT -1
Thanks for the input.
I put on a new battery volt breaker and cleaned the battery connections. I also clean the power plug connections. All the foot pedal connections are clean. I opened the head and all the connections are stable and sealed.
Any other ideas.
|
|
johnk
Junior Member
Posts: 83
|
Post by johnk on Sept 16, 2018 23:09:29 GMT -1
Dc motors have brushes that wear down with use. Never changed brushes in a TM but it's no big deal usually assuming it doesn't leak when you put it back together
|
|
