tgzay
New Member
Posts: 29
|
Post by tgzay on Oct 17, 2008 21:14:26 GMT -1
Went to use trolling motor and the pedal was limp, we had
power but no steering? Cable under the pedal is loose
What can I do? I have a 80lb maxxum pro
|
|
alex
Full Member
Posts: 195
|
Post by alex on Oct 18, 2008 12:34:31 GMT -1
under where the cable goes into the pedal there is a screw that tightens the cables up, make sure your gear is still on the spline(you have to take the top off your trolling motor)and if it is try to tighten the cable up with that screw
|
|
|
|
Post by dannyp on Oct 18, 2008 23:48:23 GMT -1
If you arent too keen in doing it yourself, Nutter, a board sponser, is a Minn Kota rep
|
|
