|
Post by Mike Bucca on Mar 10, 2008 21:03:07 GMT -1
Guys, I got a bunch of rods in my garage that haven't seen action for years. They are just sitting here collecting dust.
I have quite a few Avid St Croix Customs that I custom built myself. All of them are tricked out with split reel seats, split grip and no foregrip and spiral wrapped. I don't have any labels to remember what actual blank model that they are.
I am selling all of these custom rods for $35.00 each. A few of them might be missing a guide and can be repaired very easily at Nutter Rod and Reel up in White GA.
Also I a stock St Croix AC66MHF Avid for 50 bucks
I have the following rods for 15 bucks each
Shimano Convergence 7ft casting lure rating 1/4 to 1 oz Flipper Shimano Convergence 6ft 6 castin lure rating 1/4 to 1 oz all around rod ie spinnerbaits, senkos, texas rig etc
I have a Berkley Titatinium spinning rod with Titanium guides.
Let me know what interests you or you can come by the house and pick through them.
Mike
|
|
twmooney
Executive Member
Rather be fishing . . .
Posts: 627
|
Post by twmooney on Mar 10, 2008 21:57:29 GMT -1
Mike - I want the two Shimano casting rods. I also may want the stock Avid. I will PM you about coming by your house on Friday.
-Terry
|
|
|
Post by rally73sport on Mar 10, 2008 22:00:59 GMT -1
Mike if you don't mind me asking what were the customs bulit for.
|
|
|
Post by Mike Bucca on Mar 11, 2008 0:25:30 GMT -1
Rally, They were built for quite a few different techniques. Some are glass and I think I have a flipper in there as well. Most are pretty much all purpose type rods ie spinnerbaits, senkos', Texas Rigs ie utility rods with more than one purpose.
Terry I will hold the 2 Shimano and Stock Avid for ya. Anthony has first dibs on the custom rods (he pm'd me). I got a ton of rods here so there are plenty left.
Mike
|
|
|
Post by rally73sport on Mar 11, 2008 0:43:17 GMT -1
Thanks Mike don't know you had built so many. If you do have any glass left after Anthony picks thru I would like one. Been wanting to try glass for crasnks. Also I have to get by your place and pick up that Triple fish order. My work hours don't allow me to get over on this end of the world til early evening. Sean
|
|
|
Post by Mike Bucca on Mar 11, 2008 5:47:34 GMT -1
Sean, I totally understand on the schedule conflicts. Just let me know and I will see if we can work something out.
Mike
|
|
twmooney
Executive Member
Rather be fishing . . .
Posts: 627
|
Post by twmooney on Mar 11, 2008 12:42:37 GMT -1
Rally, They were built for quite a few different techniques. Some are glass and I think I have a flipper in there as well. Most are pretty much all purpose type rods ie spinnerbaits, senkos', Texas Rigs ie utility rods with more than one purpose. Terry I will hold the 2 Shimano and Stock Avid for ya. Anthony has first dibs on the custom rods (he pm'd me). I got a ton of rods here so there are plenty left. Mike Thanks Mike!
|
|
mlinn
New Member
Posts: 20
|
Post by mlinn on Mar 11, 2008 13:24:18 GMT -1
If the custome flipping stick is still available I'll take it. Just let me know.
|
|
|
Post by rally73sport on Mar 11, 2008 13:44:23 GMT -1
Thanks Mike, Iwill pm you about getting together Sean
|
|
|
Post by Mike Bucca on Mar 11, 2008 15:24:55 GMT -1
Anthony are you interested in the custom fliipping stick?
Mike
|
|
mlinn
New Member
Posts: 20
|
Post by mlinn on Mar 11, 2008 22:13:38 GMT -1
Mike, can you post some pictures of the remaining rods. I work nights this week and were leaving for Jackson Friday morning but I my can get buy your place prior to then. Please post what you have left with picture if possible.
|
|
|
Post by Mike Bucca on Mar 11, 2008 22:36:06 GMT -1
mlinn, I got people wanting rods left and right and some want to feel them before purchasing them. Thats more my fault than anything as I don't have the blank model #'s for the rods to know exactly what they are.
Mike
|
|