|
Post by Dallas Basser on Jan 25, 2008 2:48:23 GMT -1
1) Water pressure gauge not working at all, the dial is all the way around under the little peg. I am not sure if it has sprung its spring and I need another or is it something with the tube??? 2) Trailer jack on the 05 Ranger Trail. The inside of the jack (long threaded piece with the wheel attached has come out of it. Maybe I jacked it up to much and I couldn't get in back in to grab the gears. I didn't see anything broke, but I'm no expert you are. HELP!
|
|
|
Post by 5 BASS LIMIT on Jan 25, 2008 2:55:30 GMT -1
kevin , I think you will need a new gauge if it has sprung and on the trailer jack you may have raised it up to high and you are right but it should screw back on. Most of the jacks have a clip that keeps them from getting to that point and yours may have come off.
Let me know if I can help.
|
|
|
Post by Dallas Basser on Jan 25, 2008 3:03:21 GMT -1
Is installing the gauge something I can do? Is there an easy way to get the jack off?? There is not much room under the trailer.
|
|
|
Post by dannyp on Jan 25, 2008 11:54:34 GMT -1
Kevin, If you need a new jack Let me know, I have one for sale.
|
|
|
Post by Dallas Basser on Jan 25, 2008 12:07:54 GMT -1
Danny, is it the on that Ranger uses center fold up type on the Ranger Trail trailer? If so how much?
|
|
|
Post by 5 BASS LIMIT on Jan 25, 2008 13:26:20 GMT -1
Kevin , If you are mechanically inclined (no offense) you should be able to do it. It has 1 or 2 11/32 nuts on the back bracket that holds the gauge in place, the water tube/hose and the wires for the light , which should turn about a quarter of a turn and pull out (light wires) and you should have it out. The tube will slide over the barbed fitting on the back so you can just cut the tube up close to the end of the fitting unless it is yhe old style that mercury had which was a compression style fitting and you will have to use a wrench or pliers. Hope that explains it for you.
Anthony(5BASSLIMIT)
|
|
|
Post by Dallas Basser on Jan 25, 2008 13:44:17 GMT -1
Thanks, yes
|
|
|
Post by dannyp on Jan 25, 2008 18:20:53 GMT -1
No its just a standard swing jack, Sorry
|
|